On All Orders Over $199



On Orders Placed
Before 4PM MST

Need additional help? Call us at 1-888-494-5773

Cree RR6-12W: 6" Recessed Retrofit Housing

Quick Overview

  • Only for use with Cree 6" Edison base LED modules

  • For Insulated & Non-Insulated Ceilings

  • Suitable For Damp Locations

  • Air Tight Rated

Availability: In Stock

Availability: In stock


Specifications Sheets

View FileCree RC6 & RR6 Installation Guide    Size: (669.99 KB)
View FileCree RC6 & RR6 Spec Sheet
Cree RR6-12W

More Views

  • Cree RR6-12W
  • Cree RR6-12W


  • Only for use with Cree 6" Edison base LED modules
  • For Insulated & Non-Insulated Ceilings
  • Suitable For Damp Locations
  • Air Tight Rated

Additional Information

SKU 2453
Manufacturer Cree

Customer Reviews

RR6 retrofit can Review by Michael Holl
Product is of good quality,however it needs a larger flange diameter.If you cut the ceiling hole large enough to easily slip the can in, the flange is too small to properly hold the can and keep it from sliding up into the hole. (Posted on 5/2/2013)
Great Product - Fast Shipping Review by Mark
These housings are really great quality when compared to big box store options. Polar-Ray was very helpful in choosing the right one and items shipped promptly. (Posted on 2/5/2013)
Cree 6" Recessed light housing - good quality Review by John Powell
Excellent quality, much sturdier and better quality than you get from the local hone improvement warehouse. Delivered quickly from Polar-Ray. Will buy from them again.71351o104 (Posted on 1/17/2013)
CREE RR6 Recessed Retrofit Housing Review by Leonard S
easy to install, easy to wire up by just inserting the bare wires into the connectors. With my highly textured ceilings I had no problems with the clips holding tight. The screw socket is only attached by the wires so it is made for the CREE recessed lights. (Posted on 1/17/2013)
Great product Review by Drew
thick heavy duty housing, great quality. Like everyone has said, bend the clips down before installing otherwise it wont sit as flush as you would expect in the ceiling. had i not had to do this, it would be a 5 star product. (Posted on 1/17/2013)
Better than big box alternative Review by Matt H
I used five of these in my kitchen in conjunction with the CR6 LED modules. I ended up needing a sixth can so picked up another brand retrofit can from a big box store. The Cree model, while a bit more expensive, is made of heavier gauge material and I liked the design and construction of the junction box better. As a prior reviewer mentioned, you need to bend the clips down prior to mounting for a tight fit against the ceiling. I'm well pleased overall and would use this model again. (Posted on 1/17/2013)
Cree RR6 Recessed Retrofit Housing Review by Mark Becker
These cans worked great. Easy to install and then easy to add the LED lights.

One thing is that at times when you push the clips so that the can is tight to the drywall, the can has a bit of play it it. I figured out that prior to installation bend the clips down a bit so that they grab the drywall tighter. They ended up working great. (Posted on 1/17/2013)

Write Your Own Review

You're reviewing: Cree RR6-12W: 6" Recessed Retrofit Housing

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars