|
| Can be difficult in a j-box |
| |
The brackets that attach to the 4" j-boxes are very easy to bend when you start screwing the light in. Make sure you pre-drill where the screws go through the sheet rock, or the brackets bend and the light won't sit flush. And make sure you don't have a lot of wire in the box or you're going to fight getting these installed. The lights are beautiful and put out some great light. Dimmers work great too. If they last 20 years, then the installation is such a minor complaint. |
| |
Reviewed by: Dave Cox from Havertown, PA
5/5 |
|
 |
| great product |
| |
I'm very happy with the ease of installation, the color quality, and the dimmability of these lights. Installed 4 in my kitchen and they look great! Just what I was searching for. |
| |
Reviewed by: Mel from Omaha
5/5 |
|
|
| Nice lights |
| |
Looked at several LED recessed can conversion lights and settled on these. All 20 or so are installed in only an hour or 2. These are very bright I think. I went with 2700k after looking at the 3000k version first. They don't dim as low as I had hoped, but do dim substantially. Looking forward to my electric bill reductions |
| |
Reviewed by: Benjamin Griffith from Ann Arbor
5/5 |
|
|
| Lighting Science Glimpse LED Downlight |
| |
Item Id: 2767
Great lighting, only problem is purchased same light 4 months ealier and the delay in the older lights is much longer. new and old have different delay times.Customer service had no answer for that. |
| |
Reviewed by: Brent from
5/5 |
|
|
| Great product |
| |
This is so easy to install in an existing j-box and the light quality is great. I'll be replacing several CLF with this. Only negative: there is a short 1 second delay from switch on to light. |
| |
Reviewed by: David Vednor from So Cal
5/5 |
|
|
